rcrds

...update… optional diodes on the synch-lines need to go between the inputs and outputs to monitor (or projector)
so NOT as shown in this diagram..
synch inputs need to go directly to the logic without any diodes.. but you could DC or RC couple if you’re into that kind of thing.

some boring experiments>>>>>>

here’s a bit of still image documentation.
it’s an early attempt to make an audio controlled video-image-synthesizer.

...more>>>

some years ago i was trying to capture video with my 266MHz G3 Power PC.
using a free program called Avid-Video-Shop i got some results which worked normal but also some happy accidents.

with a capture setting called “post-compress”, the program would try to grab uncompressed video and audio before attempting to encode the material to the codec of your choice. basically every codec tried would result in mega-glitch material in the end. a very simple A/V blenderizer.

so here from 2004 is a short compilation video clocking in at 1minute, 9.5MB. it’s some of the captured material, live triggered with GRID video software.