Buy valtrex at msn. Valtrex. Valtrex side effects….

Valtrex….

will you publish the schematic at some point, or have you decided to keep it secret ?

a bit of both actually.

but the forum’s not dead… it’s still in the foetus stage.

these things take time…

I think that a lot of people (including me) would benefit from a schematic, since hands-on is the best way to learn and understand,
specially for people with limited electronic skills. And it would likely give a bit of life at the quite dead forum.

there are thousands of geeks screaming about how there is no RF shielding

no way! the whole box is one big shield.

oh, and about the forum… those of you out there who know a thing about logic, video, audio, etc. (you know who you are) ... please just register a user name and start posting some shit!

What I’ll do is wire 1 to R…

this sounds like a decent system…
been trying to get my head around colour mixing for a while…
“problem” i have is connecting knobs to ground turns everything into sort of a weird network of interrelated everything.

next colour mixer i plan to build will have 3 knobs for each colour… one to cut each channel and the other 2 to send the source to each other colour output. so the green output you can turn both knobs to G to pass the green source straight to the green output, or one knob to send G source to R and the other knob to send G source to B… not sure how this will work with 9 knobs, only tried it with one colour source, and the results were quite weird and unexpected.

...

i think that this will be quite slow going initially as far as setting up… but i’d like to host a diy video synth forum to get a bit of “open source” action going on the video hack front. a lot of people have been asking about how to get their feet wet with this sort of thing so a forum would seem to make sense.

this is the address: http://vidisynth.mediumrecords.com/forum/ and i do hope to get some basic info and maybe tutorials on there soon (ish)

Either way… I solved my “mixer” problem,thing. Instead of rotary knobs, I’ll use 9 spst switches… I think it provides me more flexibility…

What I’ll do is wire 1 to R, 1 to B, 1 to G, and that all 3 to red on the monitor/whatever. Then, 1 to B, 1 to G, 1 to R, and wire that to blue.

So you could combine let’s say… red and blue, and send them to blue channel, or send red to blue and green.

Cool!

Now… How do you get these vertical audio traces?

me not geek!